Davis Drive Jindera NSW 2642
Phone: 02 6026 3742
Fax: 02 6026 3752
Email: brent@alburygalvanizing.com.au
Web: www.alburygalvanizing.com.au
Bath size (L x W x D): 9.5 x 1.5 x 2.9m
Main classes of work galvanized:
Large or small structurals, fabricated assemblies, lintels, castings, boat trailers, marine and irrigation equipment, pole line hardware, balustrading, farm gates.
part of NEPEAN Building & Infrastructure
117-153 Rookwood Road Yagoona NSW 2199 Deliveries via Gate 2 Pickups via Gate 3
Phone: 02 9707 5000
Email: service.galserv@nepean.com
Web: www.galserv.com.au
Hours of Operation
Galserv operates 24 hours, Monday to Friday.
Office Hours
Monday – Friday 6am to 4pm
Saturday By appointment.
Sunday Closed to trade.
Delivery & Pickup Hours
Pick-up times are 6am to 4pm Monday to Friday Drop off times are 6am to 5pm Monday to Friday
Saturday drop-offs are available between 7am to 11am without appointment.
Saturday pick-ups are by advance appointment only.
Facilities
Bath size (L x W x D): 10.3 x 1.85 x 2.3m
Natural gas burner system with re-genitive exhaust.
Bag-house fume extraction and control.
Cranes: 2 x 10 tonne hoist with 2 x 10 tonne spares // 10 x 3.2 tonne twin hoist gantry cranes
Dipping Capability
Heaviest Section 10 tonne
Longest Section 16.5m (double-dip)
Height Section 9.5m (L) x 4.0m (H) (double-dip)
Additional Services
Galserv can provide project management support including sandblasting, spinning services and transport. Galserv provides competitive pick-up & delivery options including to site with an option of a Rigid (4 tonne – 12 tonne), semi-B double, extendable, or low loader hiab trucks.
Galserv is committed to high standards of service, quality and safety and holds relevant ISO accreditations. With this in mind, we offer flexible load/unload services with the use of overhead cranes and forklifts.
Service Area
Galserv services the Greater Sydney Region through our in-house delivery and pick-up service, and transport network partners to support clients across the construction, fabrication, infrastructure, mineral resources and architecture.
Main classes of work galvanized:
Galserv can accommodate steel components, structural steel, and fabricated steel products from small structures to large construction projects.
NEPEAN Building and Infrastructure also operate a GAA member galvanizing facility in Coffs Harbour, NSW. Learn more at www.galintel.com.au
part of NEPEAN Building & Infrastructure
47 Wingara Drive
Coffs Harbour NSW 2450
Phone 02 6691 2100
Email: galintel.galvanising@nepean.com
Web: www.galintel.com.au
Office Hours
Monday – Thursday 8:00am to 4:00pm
Friday 8:00am to 10:30am
Delivery & Pickup Hours
Monday – Thursday 6:00am to 1:30pm
Friday 6:00am to 10:30am
All drivers and visitors must wear steel cap shoes, appropriate PPE, and follow instructions from our team as we strive to provide safe and efficient service
Bath Size
(L x W x D) 8.1 x 1.38 x 2.5m
Galvanizing and Handling Capacities
Single-dip article – up to 7.5 metres (long) x 1.2 metres (wide) x 2.1 metres (deep)
Heaviest article for dipping – 6 tonnes
Longest article for double dipping – 10 metres with a maximum depth of 1.2 metres
Deepest article for double dipping – 3.0 metres with a maximum length of 7.5 metres
Loading/unloading cranes:
2 hoists at 3.2 tonnes per hoist
Forklifts:
1 combi-lift at 3 tonnes
4 counterbalance forklifts (1 at 1.8 tonnes, 2 at 3.0 tonnes and 1 at 8.0 tonnes)
Main Classes of Work Galvanized
Galintel can accommodate a wide range of articles, including handrails, mid-size plates and brackets, three-dimensional frames, and structural beams.
Service Area
Galintel services the Greater Coffs Harbour region, south to Port Macquarie and north to the NSW/Queensland border. Items can be delivered either on client-arranged transport or we can organise pickup and delivery to most areas at competitive rates through our transport network.
NEPEAN Building & Infrastructure also operate a galvanizing facility in Yagoona, NSW. Learn more at www.galserv.com.au
1 Wordie Place Padstow NSW 2211
Phone: 02 9707 4299
Email: galsales@galvatech.com.au
Web: www.galvatech.com.au
Bath size (L x W x D): 9.5 x 1.6 x 2.6m
Main classes of work galvanized:
Fabricated assemblies, structural steel, tube products, centrifuge work, general.
2 / 12 Ash Road Prestons NSW 2170
Phone: 02 9607 2880
Fax: 02 9607 3088
Email: sales@sydgal.com
Web: www.sydgal.com
Bath size (L x W x D): 8.3 x 1.65 x 2.6m
Main classes of work galvanized:
Fabricated assemblies, structural steel, Centrifuge specialists.
Phone: 1300 INGALV (1300 464 258)
Web: www.valmontcoatings.com
312 Pacific Highway Hexham NSW 2322
Phone: 02 4967 9000
Email: coatnswsales@valmont.com
Bath size (L x W x D) – 14.5 x 2.0 x 2.85m
Main classes of work galvanized:
Steel components and fabrications from small structures to large construction projects.
Call us or click here for more information.
20 Amax Avenue Girraween NSW 2145
Phone: 02 8868 8700
Email: coatnswsales@valmont.com
Main Bath size (L x W x D) – 12.5 x 1.8 x 2.6m
Centrifuge bath (LxWxD) – 6.7 x 1.25 x 1.68m
Main classes of work galvanized:
Steel components and fabrications from small structures to large construction projects. Centrifuge (spinning) capability for larger volumes of smaller components.
Call us or click here for more information
Lot 2 Shellharbour Road Port Kembla NSW 2505
Phone: 02 4275 8888
Email: coatnswsales@valmont.com
The Port Kembla site now operates as a Drop Off/Pick Up site for our Wollongong, South Coast and Highland customers. Avoid Sydney traffic and queues to unload – let us take care of the freight!
Main classes of work galvanized:
Steel components and fabrications from small structures to large construction projects are accommodated in our Sydney facility.
Call us or click here for more information.
©1985 - 2025 Galvanizers Association of Australia